From apprentice to registered artisan
Welding, plumbing, electrical, boilermaking, carpentry, refrigeration and the rest. Here is how you qualify, how you get the Red Seal, and the part most people miss: which separate licence you need before you may sign a certificate.
Looking for a certificate, not a career?
This page explains how artisans qualify and get licensed. If you need a Certificate of Compliance for a transfer, an insurer or a municipality, go straight to the service or to a verified artisan near you.
Start here
The distinction that costs people money
1. Your trade qualification
Proof that you are competent in the trade. It is awarded after a trade test at an accredited test centre, administered under the Quality Council for Trades and Occupations (QCTO) and the National Artisan Moderating Body. The certificate is the Red Seal, a national trade certificate under section 26D of the Skills Development Act.
Who issues it: the QCTO, through an accredited trade test centre.
2. Your licence to certify
A separate registration that gives you the legal authority to inspect, test and issue a Certificate of Compliance or a Certificate of Conformity in a specific field. Being qualified is a prerequisite. It is not the same thing.
Who issues it: it depends on the trade. PIRB for plumbing, the Department of Employment and Labour for electrical, SAQCC Gas for gas, and so on.
Why it matters commercially
Certificates are where the reliable, repeat work sits: every property transfer, every insurance claim, every occupancy application. On MyEngineer, licensed artisans receive certificate work, and artisans who are qualified but not yet licensed receive installation and repair work only. The licence typically pays for itself in a handful of jobs.
Step by step
The route to a Red Seal
Meet the entry requirement
EntryMost trades expect Grade 9 to Grade 12 with mathematics and a science or technical subject, or an N2 with the relevant technical subjects. Requirements differ by trade and by provider, so check before you enrol.
Apprenticeship, learnership or recognition of prior learning
Choose a path- Apprenticeship
- Employed and indentured with an employer, combining theory at a college with structured workplace training. Typically three to four years.
- Learnership
- A SETA funded programme combining a qualification with workplace experience, usually 18 months to three years.
- ARPL
- Artisan Recognition of Prior Learning, for people already doing the work without a certificate. Set out in the next section.
Complete the required theory
TheoryUsually N1 to N3 (or the relevant occupational curriculum) at a TVET college or accredited provider, in the subjects set for your trade. Some occupational qualifications now combine theory, practical and workplace modules into one programme.
Log the workplace experience
WorkplaceYour logbook is the evidence that you performed the required tasks under supervision. Keep it current and get it signed. An incomplete logbook is a common reason trade test applications are turned away.
Trade test preparation
PreparationMost candidates do a preparation block at an accredited trade test centre first. You practise the exact tasks under exam conditions and get a readiness assessment. Going in cold is expensive.
The trade test
AssessmentA practical assessment at a QCTO accredited trade test centre, over several days, covering the full scope of the trade. You are assessed against national standards by a registered assessor and moderated externally.
If you are unsuccessful, you receive a report identifying the specific sections to redo, and you re-test those sections.
Red Seal issued
QualifiedYou receive your national trade certificate. You are now a qualified artisan, and eligible to apply for the licences and registrations that follow.
For people already doing the work
Artisan Recognition of Prior Learning
Roughly how it runs
- You are screened against the scope of the trade. Normally you need several years of verifiable experience, commonly around three or more.
- You compile a portfolio of evidence: employer letters, payslips, job records, photographs of your work and references.
- A gap assessment shows which parts of the trade you have not covered.
- You complete targeted training and theory to close those gaps.
- You do trade test preparation and then the trade test itself.
What to gather now
- Letters from every employer stating your dates and the work you did
- Any N certificates or short courses already completed
- Photographs of completed work, ideally dated
- Copies of job cards, quotations or invoices in your name
- Your ID and highest school certificate
MyEngineer builds your evidence for you
Every job you complete through the platform is recorded with a date, a scope and a client confirmation. For an ARPL candidate, that is a portfolio assembling itself while you earn. Create a professional profile.
The second half
Which registration do you need, and who issues it?
| Trade | Qualification | Additional registration or licence | What it lets you do |
|---|---|---|---|
| Plumbing | Red Seal plumber | PIRB Plumbing Industry Registration Board, with IOPSA as the industry body. | Issue plumbing and geyser Certificates of Compliance, including solar geyser installations. |
| Electrical | Red Seal electrician | Wireman’s licence Registered Person, Department of Employment and Labour. | Inspect, test and issue an electrical Certificate of Compliance. The classes are Single Phase Tester, Installation Electrician and Master Installation Electrician. |
| Gas (LPG) | Relevant trade or gas training | SAQCC Gas registration as an authorised gas practitioner. | Install gas appliances and issue a Certificate of Conformity. |
| Welding | Red Seal welder or boilermaker | Welder coding to the applicable code, commonly through SAIW. Inspectors qualify separately as welding inspectors. | Weld on coded or pressure work. Inspect and sign off welded fabrication. |
| Refrigeration and HVAC | Red Seal refrigeration mechanic | SAQCC Gas registration in the refrigerant category. | Handle refrigerant gases lawfully and certify installations. |
| Solar PV | Electrical trade plus PV specific training | PV installer certification, commonly aligned to SAPVIA and P4 type standards, plus a wireman’s licence to sign the CoC. | Install and certify grid tied and hybrid PV systems, and support SSEG registration. |
| Lift and escalator | Relevant trade | Registration under the applicable lift regulations. | Install, maintain and certify lifts. |
| Carpentry, bricklaying, roofing, painting | Red Seal in the trade | No statutory certificate body. NHBRC enrolment applies to home builders. | Build and finish. NHBRC registration is required to build new homes for sale. |
| Construction contracting | Trade or management qualification | CIDB grading, and NHBRC for residential work. | Tender for public works at your grade, and build homes lawfully. |
Find a verified artisan by trade
If you are reading this because you need the certificate rather than the licence, these are the trades the directory already filters on. Every listing shows the registration that was verified, and never the documents behind it.
Plumbing
A qualified plumber may do plumbing work. Only a PIRB registered plumber may issue the Certificate of Compliance that a property transfer, an insurer or a municipality asks for. PIRB certificates are issued against a controlled numbering system, which is what makes them checkable.
Route
- Grade 9 to Grade 12 with mathematics and science, or N2 with the relevant subjects
- Apprenticeship, learnership or ARPL
- N1 to N3 theory, or the integrated occupational curriculum
- Workplace logbook completed and signed
- Trade test at a QCTO accredited centre, which gives you the Red Seal
- Register with PIRB, and join IOPSA for industry support and continuing development
On the client side, this is the plumbing Certificate of Compliance that homeowners, estate agents and conveyancers order from us.
What PIRB registration lets you do
- Issuing plumbing and geyser Certificates of Compliance
- Solar geyser and heat pump installation sign off
- Insurance panel work, which is steady and repeat
- Estate agent and conveyancer referral work
- A verifiable registration number clients can check
Registration is renewed periodically and requires continuing development. A lapsed registration means the certificates you issue are not valid.
Electrical
Under the Electrical Installation Regulations, only a Registered Person, someone holding a wireman’s licence issued by the Department of Employment and Labour, may inspect, test and issue an electrical Certificate of Compliance. Every property transfer in South Africa needs one that is current.
Route
- Grade 9 to Grade 12 with mathematics and science, or N2 with the relevant subjects
- Apprenticeship, learnership or ARPL
- N1 to N3, and many go on to N4 to N6 for installation work
- Trade test, which gives you the Red Seal electrician
- Around two to three years of installation experience after qualifying
- Installation Rules assessment with an assessor registered with the relevant SETA
- Apply to the Department of Employment and Labour for the wireman’s licence in the class you qualify for
On the client side, this is the electrical Certificate of Compliance, which we route only to professionals whose licence we have verified.
The three classes
- Single Phase Tester
- Single phase installations only, which is typical of smaller residential work.
- Installation Electrician
- Single phase and three phase installations, excluding specialised installations.
- Master Installation Electrician
- All installations, including specialised ones. The widest authority, and the one commercial clients look for.
An electrical contractor business must also be registered with the Department of Employment and Labour, and must employ or contract a Registered Person to issue CoCs. Being licensed personally and being a registered contractor are, again, two different things.
Welding
Welding is where the gap between qualified and coded is widest, and where the money is. A Red Seal welder is qualified in the trade. A coded welder has passed a welder qualification test to a specific code, in a specific process, position, material and thickness range, witnessed and certified.
Route
- Entry level welding training, or an apprenticeship in welding or boilermaking
- Trade test, which gives you the Red Seal welder or boilermaker
- Welder qualification tests to the applicable code, commonly through the Southern African Institute of Welding (SAIW), which represents South Africa in the International Institute of Welding
- Each coding is specific: process (for example MMA, MIG or TIG), position, material group and thickness range
- Codings have validity periods and must be maintained by continuous work and periodic re-testing
Clients looking for coded welders and fabricators reach them through the welding and fabrication listings.
Progressing further
- Welding inspector, who inspects and signs off welded fabrication
- International Welding Specialist, Technologist or Engineer, the IIW diploma path, recognised internationally
- NDT qualification: radiographic, ultrasonic, magnetic particle and dye penetrant testing
- Pressure equipment work under the applicable regulations, which brings its own approvals
Coded welders and welding inspectors are among the best paid artisans in South Africa, and demand in petrochemical, power and structural work is persistent.
Where MyEngineer fits
Qualified, licensed, and actually getting work
A certificate with no clients is a piece of paper. We put verified artisans in front of the people who need them: homeowners, estate agents, conveyancers, insurers, body corporates and contractors.
- Your trade certificate and licence verified once, then kept private
- Certificate work routed only to licensed practitioners
- Your completed jobs recorded, and usable as ARPL evidence
- Payment by milestone, with payment protection being set up
Bodies to know
- QCTO
- Quality Council for Trades and Occupations. Owns the trade test and issues the national trade certificate.
- NAMB
- National Artisan Moderating Body. Moderates trade testing.
- SETAs
- Sector bodies that fund learnerships and register assessors, for example EWSETA, merSETA and CETA.
- PIRB
- Plumbing Industry Registration Board. Plumber registration and plumbing Certificates of Compliance.
- Department of Employment and Labour
- Wireman’s licences and electrical contractor registration.
- SAQCC Gas
- Gas practitioner registration and Certificates of Conformity.
- SAIW
- Southern African Institute of Welding. Welder coding, welding inspection and IIW diplomas.
- CIDB and NHBRC
- Contractor grading for public works, and home builder registration.
Questions people ask
Sources and further reading
- PIRB: plumber registration (opens in a new tab)Who may register, and how a plumbing Certificate of Compliance is numbered.
- Department of Employment and Labour (opens in a new tab)Electrical Installation Regulations, Registered Person applications and electrical contractor registration.
- QCTO (opens in a new tab)Trade test policy, accredited trade test centres, the National Artisan Moderating Body and ARPL.
- SAIW (opens in a new tab)Welder qualification and coding, welding inspection and the IIW diploma path.
- SAQCC Gas (opens in a new tab)Authorised gas practitioner registration and Certificates of Conformity.
The statutes behind it
- Skills Development Act 97 of 1998, section 26D: the trade test and the national trade certificate, which is the Red Seal.
- Occupational Health and Safety Act 85 of 1993, Electrical Installation Regulations: the Registered Person, the electrical Certificate of Compliance and contractor registration.
- Occupational Health and Safety Act 85 of 1993, Pressure Equipment Regulations: welding and gas work on pressure equipment, and the Certificate of Conformity.
General guidance for the public and for tradespeople. Each board sets its own current requirements, and those take precedence over anything on this page.